C: Filling machine, bottle washing, capping, labeling, packing system

On this page... (hide)

1. System C: Filling Machine with Bottle Washing and Packing System for sale.
1. 1.1 System C: Filling Machine with Bottle Washing and Packing System details.
2. System C: Filling Machine with Bottle Washing and Packing System (specifications).

1. System C: Filling Machine with Bottle Washing and Packing System for sale.

1.1 System C: Filling Machine with Bottle Washing and Packing System details.

Capacity: 8,000 BPH (for the 350 ml. bottles).
Bottle types:350 ml. and 750 ml. round glass bottle.
Labeler:Shrink sleeve label.

Item #. Description of this item: Quantity included:

C1Automatic bottle washing machine.

  C1-1 Automatic bottle washing machine.

  C1-2includes 750cc part change.

C2Glass bottle steam pre-warmer.

C3Automatic cap sending conveyor.

C4Automatic bottle filler and crowner machine.

  C4-1Automatic glass bottle filler and crowner machine.

  C4-2includes 750cc part change.

C5300 Liter SU S304 stainless back fill tank.

C6CIP (clean in place) system.

C7Automatic pasteurizer cooler (2*10).

C8Automatic blow dryer.

C9Vertical auto shrink sleeve machine.

  C9-1Vertical auto shrink sleeve machine.

  C9-2750cc holder.

  C9-3750cc feeding screw.

  C9-4750cc knife plate.

C10Label jet printer machine.

C11Inspection lamp.

C12Full line electronic control system.

C13Includes all of the related conveyor equipment.

2. System C: Filling Machine with Bottle Washing and Packing System (specifications).

2.1 C1Automatic bottle washing machine.

2.2 C1-1Automatic bottle washing machine.

2.3 C1-2includes 750cc part change.

                Type: 12 Rows & 2 soaking tanks & label remover. 
            Container Volume: 300cc. 200cc. 
            Capacity: 60-120BPM.
            Type of container: Labeled reclaim glass bottle. 
            Power used: main drive 5HP(equipped with inverter), empty bottle infeed device 1HP.
                            Caustic soda spray pump 5HPX2, hot water spray pump 2HP. 
                            Hot water spray pump 3HPX2, label removing pump 5HPX2. 
                            Final rinse spray pump 3HP, label filter HP. 
                            Vapor removing fan 1HP. 
                Rinses bottle’s interior with 40℃ the third time reclaimed water & first bath 40 seconds. 
                Bathes in 75℃ caustic soda solution for 4 minutes. 
                Does final rinse of bottle’s interior 8 times & bottle’s exterior 4 times w/ 65℃ caustic soda. 
                   Solution & bath 3.6 minutes.
                Rinses inside of bottle 4 times & outside of bottle 1 times with 20℃ the first time.

Reclaimed water.

                Rinses inside of bottle 4 times & outside of bottle 2 times with 35℃ the second time.

Reclaimed water.

Rinses inside of bottle 4 times & outside of bottle 2 times with 50℃ the third time.
Reclaimed water.
Final rinse of bottle’s interior 4 times with normal atmospheric temperature water.
Automatic bottle infeed device 1 unit.
Bottle inside & outside spray system set.
Plastic basket unit x 1.
Automatic temperature control & steam heater unit x 1.
Automatic discharge system set x 1.
Sight glass window for rinsing section unit x 1.
Infeed & discharge system safety controller set x 1.
Pneumatic control equipment set x 1.
Chain type label remover set x 1.
Electric control panel & system set x 1.
Over-load clutch device for main drive set x 1.
Over-load clutch device for infeed system set x 1.
Over-load clutch device for discharge system set x 1.
Tubular heat exchange system sets x 2.
Rinsing timing control device set x 1.
Vapor remover device units x 2.
Water pressure detector & piping system set x 1.
Steam piping system set x 1.
Manhole & dregs cleaning gate device for maintenance set x 1.

2.4 C2Glass bottle steam pre-warmer.

            Size: L35000mm*w300mm*500mm. 
            Adjusted Steam valve unit x 1. 
            Pre steam warmer exhaust fan unit x 1. 
            Pressure gauge unit x 1.

2.5 C3Automatic cap sending conveyor.

            Volume of storage tank: 10,000 pieces. 
            Power used: main drive motor HP. 
                       Vibrator motor 1/10HP. 
            (1) Cap storage tank made of SU S304 stainless steel. 
           (2) Conveyor frame made of SU S304 stainless steel. 
            (3) Electric control sensor unit x 1. 
            (4) Electric control system & panel unit x 1.

2.6 C4Automatic bottle filler and crowner machine.

2.7 C5300 Liter SU S304 stainless back fill tank.

2.8 C6CIP (clean in place) system.

Type: 30 filling valves & 8 crowning cylinders.
Volume of container: 350cc, 750cc.
Capacity: 350cc-170 BPM (bottles per minute).
Kind of container: glass bottle.
Kind of cap: crown cap.
Power used: Main drive motor 3HP (Equipped with inverter).
Exhaust fan motor 2HP.
Cap selector 1/10HP.
Fixed level type filling valves unit x 30.
Compression spring type bottle lifter unit x 30.
Filling bowl made of SU S304 stainless steel unit x 1.
Float type liquid level control system set x 1.
Filling bowl decompress exhaust device set x 1.
Filling bowl height adjusting device set x 1.
Crown hopper made of SU S304 stainless steel.
Rotary-type cap selector unit x 1.
Magnetic crowning cylinder units x 1.
Bottle infeed timing screw device unit x 1.
Plastic star-wheel device units x 3.
Plastic bottle guide device unit x 1.
Sensor control device set x 1.
Base table covered with stainless steel plate.
Electric control system & panel set x 1.
Safety Guard set x 1.

2.9 C7Automatic pasteurizer cooler (2*10).

Type: chain width 75" & 4 tanks over-flow type.
Kind of container: Glass bottle.
Volume of container: 350cc. 750cc.
Capacity: 350cc-170 BPM (bottles per minute).
Procedure: 80℃- 65℃ Pasteurizes in 5 minutes。
65℃ cooling to normal temperature in 12 minutes.
Specification: L10m*W2m*H2m.
Power consumption: Main drive 1HP (Equipped with inverter).
Spray pump 7.5 HP* 4.
Water drop blow-off fan 3HP.
5 sections type frame & support made of SU S304 stainless steel.
Temperature control system unit x 1.
SU S304 stainless steel spray piping system set x 1.
Container infeed & discharge conveyor set x 1.
Spray section limpid acrylic sight window set x 1.
Cooling water infeed piping system set x 1.
Manhole device for maintenance set x 1.
Drainage piping system set x 1.
Plastic modular conveyor belts (MCC) set x 1.
Equipped with filter of recycling tank set x 1.
Level control system unit x 1.
Tubular heat exchange system set x 1.
Steam piping system set x 1.
Electric control system & panel set x 1.
(part of the bottle washing filling system)

2.10 C8Automatic blow dryer machine.

            Type: twin blowers-twin blowing pipes. 
            King of container: Glass bottle. 
            Volume of container: 350cc. 750cc. 
            Capacity: 350cc-170 BPM (bottles per minute). 
            Consumption of power: Blower 5HP*2. 
            (1)SU S304 stainless steel frame & support set x 1
            (2)SU S304 stainless steel blowing pipes device set x1 
            (3)SU S304 stainless steel & PP limpid plastic sight gate x 1 
            (4)Blowing pipes equipped with flow adjusting device x 1
            (5)Designed blowing pipes blowing both side of bottles 
            (6)The blowing angle can be adjust 
            (7)Electronic control system set x 1.

2.11 C9Vertical auto shrink sleeve machine.

2.12 C9-1Vertical auto shrink sleeve machine.

2.13 C9-2750cc holder.

2.14 C9-3750cc feeding screw.

2.15 C9-4750cc knife plate.

(A) Description:
•1. Machine dimension: 1150L*1050W*2000H/ mm .
•2. Weight: 600kg .
•3. Range of bottle diameter: φ32mmφ125mm .
•4. Height of bottle: 320mm Max .
•5. Label length: 250mm Max.
•6. Label thickness: 0.035~0.13mm .
•7. Coiled label inner drum diameter: 5"~10" .
•8. Machine speed: 250BPM (Label length under 90mm) .
•9. Power consumption: ACφ3.5KW+15 KW.
•10. Tunnel dimension: 1500L*543W*624 H.

(B) Accessories:
•1. Holder.
•2. Feed screw 350mm.
•3. Label inserting device.
•4. Adjustable knife plate w/clutch.
•5. Fiber optic sensor.
•6. Manual up/down table.
•7. Digital temperature controller.
•8. Adjustable label driver.
•9. Control Panel.
•10. Controller w/LED Display.
•11. Film tensioning unit.
•12. Safety housing.
•13. Conveyors (2 meters).
•14. Conveyors support frames.
•15. Bottle clamping device.
•16. Stainless steel heater.
•17. Circulating fan.
•18. Cooling fans.
•19. Inverter.
•20. Control panel of tunnel.

2.16 C10 Label jet printer.

          Brand: UK Domino. 
          Control unit x 1.

Stainless steel cabinet, I P53 rate.
Start/off one touch button, Auto Flush.
LCD Display.

          60 Micron nozzle.

Two lines character printing capability.

          Standard software.
          Local language.
          English manual.
          Photocell.
            Stainless steel printing stand set x 1. 
            Print head stand set x 1.
            Flush pack set x 1.
            Three colors alarm kit set x 1.
            I R270BK Ink reservoir (1200ml) set x 1.
            I C270BK Ink (825ML) set x 1.
            M C270BK Make up (825ml) set x 1.
            1000L Washer (1000ml) set x 1.

2.17 C11Inspection lamp.

Volume of container: 350cc. 750cc.
Capacity: 350cc-170BPM.
Container type: Glass bottle.
Material: Frame & steel made of SU S304 stainless steel.
(1) Acrylic-plastic faceplate piece x 1.
(2) Fluorescent lamp unit x 2.
(3) Electric panel set x 1.

2.18 C12Full line electronic control system.

Material, control box: SU S304.

            Material, control panel: SU S304. 
            Material, cable piping: SU S304. 
            Control box & panel thickness: 2mm. 
            Electronic components: FUJI brand(or the same class). 
            Control system: Mitsubishi PLC & inverter. 
            Control box equipped with lighting device. 
            Control box equipped with fan radiator. 
            Equipped with control-status system.

2.19 C13Includes all of the related conveyor equipment.

M1.Two line conveyor3.5m(17800) (62300)
Two lines curve1 set(30200) (30200)
Drive motor 2HP (equipped with inverter)1 set(30200) (30200)
M2.Single line conveyor6m(11300) (67800)
Single line curve3 set(18200) (54600)
Drive motor 1HP (equipped with inverter)1 set(25200) (25200)
M3.Single line conveyor5.5m(11300) (62150)
Single line curve2 set(18200) (36400)
Drive motor 1HP (equipped with inverter)1 set(25200) (25200)
M4.Single line conveyor4.5m(11300) (50850)
Single line curve2 set(18200) (36400)
Drive motor 1HP (equipped with inverter)1 set(25200) (25200)
M5.Two lines conveyor4.5m(17800) (80100)
Two lines curve1 set(30200) (30200)
Drive motor 2HP (equipped with inverter)1 set(30200) (30200)
M6.Two lines conveyor7m(17800) (124600)
Two lines curve1 set(30200) (30200)
Drive motor 2HP (equipped with inverter)2 set(30200) (60400)
M7.Two lines conveyor6.5m(17800) (115700)
Two lines curve1 set(30200) (30200)
Drive motor 2HP (equipped with inverter)1 set(30200) (30200)
M8.Single line conveyor7.5m(11300) (84750)
Single line curve2 set(18200) (36400)
Drive motor 1HP (equipped with inverter)1 set(25200) (25200)
M9.Single line conveyor8m (11300) (90400)
Drive motor 1HP (equipped with inverter)1 set(25200) (25200)
M10.Three lines conveyor6.5m (24300) (157950)
Three lines curve2 set(38100) (76200)
Drive motor 3HP (equipped with inverter)1 set(36000) (36000)
M11-1 Roll conveyor (without power drive)4m(6000) (24000)
M11-2 Roll conveyor (with power drive)6m(10800) (64800)
Drive motor 2HP1 set (25900) (25900)
(1) Construction of conveyor: Top-chain made in HOLLAND (MCC).
Frame made of SU S304 stainless steel.
Stand & guide made of SU S304 stainless steel & plastic.
(2) Construction of curve: Curve made in HOLLAND (MCC).
Frame made of SU S304 stainless steel
(3) Drive motor: equipped with inverter.

2.20 Highest quality equipment.

Highest quality machinery made by reputable manufacturers. Machinery and equipment for the C System: Filling Machine, Bottle Washing, Rinsing, Filling, Capping, Labeling System.

This equipment and the accompanying complete glass bottling factory line is already completed in our warehouse and ready for shipping.

Please Contact us for pricing, equipment details and other questions.

Glass Bottling .com